| |
2Processing Environment
1) Clean the operating platform to prevent scratching or ripping the panel surface.
2) Pay attention to the temperature control when processing because most materials have the characteristics of being fragile in cold and soft in hot, which are difficult to be detected by the sense of touching. Supposing to fold a aluminum skin with 0.5mm thickness polyester coating under 0 , you will find a crack happens on the coating along the folding line, which will never occur to the same panel when being folded over 35 however. Therefore, the most proper temperature for the curtain-wall panel folding will be in the range of 20-50 . (Refer to the temperature of material and environment)
3Protective Film Removing
1) It is strongly recommended to peel off the protective film as soon as installation finishes.
2) And the film removing should not be later than 60 days after installation.
3) Please following the instructions printed on the protective film.
4Cleanness & Maintenance
1) Please use neutral cleaning detergents like water, and avoid aggressive acid, alkali, or ethyl alcohol because they will make damages to the coated surface.
2) Never use strong organic solvent such as MEK (Methyl Ethyl Ketone), MIBK
(Methyl Iso-butyl Ketone), Triclene (Tri-chloroethylene) or thinner.
3) Please use soft wiping tools, such as soft cloth or sponge etc., and avoid the abrasive cleaners.
4) Please clean the coated surface under moderate temperatures instead of extreme temperatures.
|
