Normal Installation Methods

1) Method One – Glue Conjunction
a) Distribute the intensified glue evenly on the inverse of the aluminum composite panel and one side of the plywood that has been fixed on the wall in advance. Waiting for a moment until the glue becomes glutinous, then press the panel by both hands to the proper position and wait until make sure that the panel completely sticks to the plywood. Note that never use iron hammers or other hardware to clout the panel.
b) Leave a 3--5mm width connection seam between each of panels when installing, and then fill the sealant or decorative belt into the seam.

2) Method Two – Double-Face Adhesive Tape Conjunction
Firstly, the double-face adhesive tape is put on the inverse of tailored panel along its four edges, and note the tapes' area should be no less than 30% of the total area of each panel. Also, the double-face adhesive tape made from low-foaming polyester or polyethylene should be selected according to the size and weight of panels.
Secondly, put the panel onto the plywood correctly by both hands, and press its four sides emphatically to make sure the panel and plywood have been stuck to each other firmly.
At last, further fasten the panel by shooting air nails along its four edges with the help of electric air-pushed gun.